What should be paid attention to during the operation of the matt release film? Matt release membrane is also called matt release membrane, Matt Membrane, PET matt membrane, TPX matt separation membrane, fluoroplastic separation membrane, fluoroplastic release membrane; PET matt film is based on the original PET transparent film, and the raw material formula is properly adjusted. After adding silicon dioxide, the release film has no viscosity or slight viscosity after contacting with specific materials under limited conditions.

　　TPX matt release film is mainly used for FPC flexible circuit board, die cutting industry, food packaging, automobile thermal insulation. The main brands of matt release film are: Top 100, DuPont, Diren, Guanghui, BENCH, Growing, DuPont, Teijin.

　　Cut the matt release membrane into the required dimensions

　　Use a brush to gently brush (or absorb with a suction gun) the FPC surface to remove the hair chips or impurities

　　Place and fix the matt release film according to the work instructions and the position and provisions of the inspection standard card

　　The stacked semi-finished products are sent to the hot pressing station for pressing operation

　　If it is reused for no more than 8 times, the release film pressing surface must be replaced each time

　　Pay attention to the cleanliness of the interface between release film and FCCL during operation

　　Operation tools shall not be placed on the product, or they may be scratched or crushed